Tags |
|
|
Links |
|
|
Atricle Dump - Costing At No Cost
Let’s start with what Media Training is not.It’s not spin.Media Training isn’t designed to teach those in the public eye how not to deal with the obvious, avoid blame or dance around difficult truths.What media training DOES do is help level the playing field for those facing the media, either for themselves or on behalf of others. To those outside the process, media training may seem like a way to “manage” the media. In fact, those inside the process know better than to think the media can be managed. The goal of media training is to teach management of your message to the public through the media. Managing the message is not the reporters’ job—It’s the job of the subject being interviewed.In truth, saying what you want to say in the way you want to say it to a reporter is not an easy thing to do. No matter how substantial your title, how great a record of success or your level of confidence, it’s no
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do
Landscaping is hard work and this is why most Americans, Government Agencies and Businesses hire out the service. The key to the landscaping business is staying efficient and having the right team. As a landscaping business expands it becomes harder and harder to get all the work done. If you have weather issues or cannot get to an account on your regular schedule the customer maybe left without good service and you may not be able to get to them for a week.The most critical part to staying efficient is having good crews or teams, which hustle. Motivating your crews is difficult. One brilliant idea, which was developed by Expert Landscaper Jon Bitzer, was to modify summer work schedules due to hot weather and humidity. Jon takes care of the landscaping for much of the redevelopment area, including all the parks in Atlantic City. With only 42 people, his crews are broken into specialty teams. Each crew is designated tasks a
The estimation comes into play for several reasons: to prepare production budgets, for cost management and to define the prices and to make offers to customers.
Here we want to concentrate our attention on the problem of cost estimation in the cutting business.
We must make distinct considerations according to the material type to be cut.
Materials can be divided into two big categories, man-made and natural. It would be possible to make further classifications but these two are enough for our purposes.
The problem with man-made materials
As a first case, we deal with man-made materials, for which apparently the cost estimate of cutting is easy: the material is usually defect-free and comes in regular shapes, typically sheets or rolls of a standard size.
It may be simple to make a rough estimate of the quantity (and therefore the cost) of material needed to fulfil an order but it is important to consider a couple of factors:
- The final products (the cut parts) are hardly differentiated, so, for a given material, the distinguishing points of an offer for a cutting job can only be price and delivery time. Delivery time can be managed, since each company has a known average throughput and on the market there are many software products that can manage the production schedule to provide in time the parts to be shipped to the customers.
- Price is a much harder question since it is often the point on which the customer’s decisions are based. For this reason it is extremely important to have a sound basis to make a price, knowing exactly which is the cost of the material needed.
The problem with natural materials
Natural materials, such as leather or wood, are a completely different story. They come in a wide variety of sizes and shapes and can have defects and holes. Moreover, the parts to be cut often have placing constraints (orientation, quality and so on) that make much harder to figure out how they can fit on the available piece of material.
There is no way to make a reliable estimate of the quantities to be used on natural materials.
All the available methods are based on mid- and long-term statistics, that can be helpful only as far as the main features of the material are similar across different batches and the parts to be cut are similar across different articles.
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do
There are many avenues for success. Sometimes, success is just a door away; once you have to right key, success will fall into your hands. But in business, success is not gained through luck alone. It will not come to you unless you do something to achieve it.Success is the goal of all businessmen. And because of this, it always becomes the top priority in business. But success is intangible, and that it makes it so hard to achieve. So how could you possibly become successful?The answer is to plan and organize the things within your company. Your door to success is choosing the right keys. Below are the ten keys to let success into your business:Key #1: Be a serious dreamer.Picture yourself in the next few years. Be a positive thinker. It may sound ridiculous but it will motivate you to become serious in anything you plan, especially when it comes to planning your success.Key #2: Aim for your go
The problem with man-made materials
As a first case, we deal with man-made materials, for which apparently the cost estimate of cutting is easy: the material is usually defect-free and comes in regular shapes, typically sheets or rolls of a standard size.
It may be simple to make a rough estimate of the quantity (and therefore the cost) of material needed to fulfil an order but it is important to consider a couple of factors:
- The final products (the cut parts) are hardly differentiated, so, for a given material, the distinguishing points of an offer for a cutting job can only be price and delivery time. Delivery time can be managed, since each company has a known average throughput and on the market there are many software products that can manage the production schedule to provide in time the parts to be shipped to the customers.
- Price is a much harder question since it is often the point on which the customer’s decisions are based. For this reason it is extremely important to have a sound basis to make a price, knowing exactly which is the cost of the material needed.
The problem with natural materials
Natural materials, such as leather or wood, are a completely different story. They come in a wide variety of sizes and shapes and can have defects and holes. Moreover, the parts to be cut often have placing constraints (orientation, quality and so on) that make much harder to figure out how they can fit on the available piece of material.
There is no way to make a reliable estimate of the quantities to be used on natural materials.
All the available methods are based on mid- and long-term statistics, that can be helpful only as far as the main features of the material are similar across different batches and the parts to be cut are similar across different articles.
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do
Although knowing how to fight fires and use fire extinguishers is important, the best tool to fight fires is fire prevention. If you can take adequate steps to avoid the dangers of fire and detect the signs early then you are much less likely to be involved in a serious incident.Fire prevention ranges from knowing how to install smoke alarms to dialling emergency services and knowing emergency numbers. It also includes knowing where particular fire hazards are located and how to minimise these hazards so that fires can be prevented.Here is a guide to the best fire prevention tools and techniques to protect your home and your workplace.Smoke Alarms And Smoke DetectorsSmoke alarms (or smoke detectors) are one of the best ways to detect fires early, thereby preventing serious fires from occurring. They are particularly good for fires that might occur at night, which can be silent killers with smoke and de
The problem with natural materials
Natural materials, such as leather or wood, are a completely different story. They come in a wide variety of sizes and shapes and can have defects and holes. Moreover, the parts to be cut often have placing constraints (orientation, quality and so on) that make much harder to figure out how they can fit on the available piece of material.
There is no way to make a reliable estimate of the quantities to be used on natural materials.
All the available methods are based on mid- and long-term statistics, that can be helpful only as far as the main features of the material are similar across different batches and the parts to be cut are similar across different articles.
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do
Leisure time is more important than ever before. It is increasingly likely that both partners in a household are working full time; commuting adds to the burden of the daily routine, whether to school or to work. There is also the increasing danger of sedentary occupations, producing the demand for active leisure or ‘recreation’. More working time is spent every year sitting in front of a computer terminal or on the telephone, followed by driving home or sitting in a train. At home, the temptation is greater than ever before to sit in front of the widescreen television, with its superb picture and sound, or to spend hours on the Internet or playing electronic games.To satisfy the demand for activities that break into the sedentary pattern, there is a vast range available both inside and outside the home. In total, the leisure and recreation market as defined by this Market Review involved consumer spending of ?83.93bn in 2
Natural materials, such as leather or wood, are a completely different story. They come in a wide variety of sizes and shapes and can have defects and holes. Moreover, the parts to be cut often have placing constraints (orientation, quality and so on) that make much harder to figure out how they can fit on the available piece of material.
There is no way to make a reliable estimate of the quantities to be used on natural materials.
All the available methods are based on mid- and long-term statistics, that can be helpful only as far as the main features of the material are similar across different batches and the parts to be cut are similar across different articles.
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do
Outsourcing your email operation makes sense.You may be running a business that requires processing many emails, whether it is, Sales emails to and from customers, Query emails to and from customers, other emails required to run the business, processing emails forms a core part of any established business.As volumes increase, it is important to make sure that emails are processed in a timely, professional and cost effective manner. Losing control of your email operation can result in unhappy customers and subsequent loss of business.There are many reasons you may consider outsourcing, including the following, Lack of resources to process current and increasing email volumes, in a prompt and accurate manner, hence resulting in lost business and unhappy customers, Increasing costs involved in resources used to process the emails and tying down valuable human resources to do a job that can be done elsewhere
But in a real production environment these conditions are rarely respected and the estimates are always prone to errors and, of course, the offers based on these estimates are wrong.
The only way to obtain a perfect estimate is to place the parts on the actual material to be cut and then calculate the actual consumption.
The ultimate question
How to make an accurate and reliable estimate, quickly and at a reasonable cost?
We propose the ultimate answer to this question: do not estimate the material consumption: get the actual cost before cutting!
And the only way to get the data of the actual placements of parts is to perform the nesting for the whole order on the actual material batch to be cut.
This was almost impossible in the recent past, because it was a time-consuming process and required the availability of a high-performance computer with a (expensive) nesting software. In a few words, the automatic nesting for costing purposes was too expensive to be an option.
This is no more true for those companies who use the innovative technology of CUTWEB.
CUTWEB is a web-based application that allows the management and sharing of all the data related to nesting and cutting and provides the access to an on-line nesting service that uses high-performance nesting strategies, fine-tuned for different scenarios.
A web-based application like Cutweb can be used from any (cheap) internet-connected PC and a nesting server deals with all the calculations, getting rid of the need of a in-house dedicated workstation and of the need to buy a software license for each PC that access to nesting and cutting data.
Costing with CUTWEB becomes a breeze:
- upload the parts and the material data
- upload the order
- start the nesting.
- See the actual material cost
All this can be done quickly and at a negligible cost, just a few eurocents for each test so it becomes possible to run as many tests as you need.
In a few minutes the layouts will be calculated, and you will see exactly how and where the parts will be eventually cut and get a detailed (and of course customisable) report about the nesting.
You can keep the nesting on CUTWEB as long as you wish, and when the order is confirmed by the customer, then (and only then) you download it and cut at once, since the CUTWEB setup ensures that the downloaded data are compatible with your cutting machine.
The nesting cost is just a few Eurocents, you actually pay the nesting service when you download the data needed for the cutting.
There are many benefits that you can achieve organising the work on this way can be summarised in some key points:
- you pay for the nesting service only when the order is confirmed and you download the data for actual cutting
- there is no risk to waste your money on n
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.articledump.net/article/5007/articledump-Costing-At-No-Cost.html">Costing At No Cost</a>
BB link (for phorums):
[url=http://www.articledump.net/article/5007/articledump-Costing-At-No-Cost.html]Costing At No Cost[/url]
Related Articles:
Want a Credit Card Merchant Account?
Bookmark it:
|