Atricle Dump
#1 in Business Subscribe Email Print

You are here: Home > Business > Business > What to Look For in an Oil Analysis Lab

Tags

  • conveyed
  • indicate
  • place
  • often times
  • capacities depending
  • reporting tools

  • Links

  • Childbirth Choices - Be Informed
  • Where Can I Find the Hottest Repossessed Cars Out There?
  • Facts About Bottled Water
  • Atricle Dump - What to Look For in an Oil Analysis Lab

    Electronic Document Management - The Basics - Part 2
    Introduction to Document ManagementIf you've never used a document management system, then it is entirely possible that you aren't aware of how valuable these products can be. Companies and individuals who manage a diverse array of documents have found that document management systems serve to simplify their lives and make both storing documents and later obtaining those documents much easier.Many companies are forced to go the way of electronic documents because of The Sarbanes Oxley Act of 2002, industry compliance (HIPPA), or because it is required
    lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits

    New Grads - Beat the Job Competition
    Winning your new job takes more than just arriving on time – after all, that's obviously expected. But, what else are employers expecting from you when you arrive for your interview? Here are four tips you'll want to keep in mind for interview success:Tip 1: Employers will assume that you have done a good amount of research on their company. When they ask you what you know about them, you'll get off to a good start by being able to discuss several pertinent points about the Company. To do this you must be sure your research includes:* What the com
    Most industrial plants in need of oil analysis services might begin their search on the web. While this is a common and effective place to begin the evaluation process, it definitely will not tell the whole story. Knowing the right questions to ask after the initial search is completed is crucial in uncovering a superior provider from an average oil analysis provider.

    While the discerning potential customer may ask questions regarding testing capabilities, process and protocol, and price there are other questions whose answers may mean the difference between a seamless interaction and a laborious one. It is these questions that are most commonly overlooked and most important to understand.

    With your time and money on the line, and so many oil analysis labs to pick from, how do you choose the right company? Here are five critical questions to ask when evaluating an oil analysis laboratory to ensure a successful long term oil analysis program.

    1. What is your normal turnaround?
    Contrary to popular belief, there are oil analysis laboratories out there that have the capability to provide high quality results and reporting in 24 hours. If the lab you’re working with doesn’t provide this, at least make sure expectations are defined up front. Know exactly what you’ll be receiving, and when. Do “days” include weekends? What about business hours?

    While sample turnaround varies, just asking this question up front can give you a good idea of the overall process efficiency. No matter what the turnaround time, there should always be notification systems in place so that you know when your samples have been received and when your samples are finished. The samples you pull contain time sensitive information which should be conveyed to you in a prompt fashion. The sooner you get your results the better your program runs.

    2. Is there an open line of communication?
    It’s important to know you won’t be left high and dry in the event you need answers or support immediately. Often times pressing machine problems arise unexpectedly and your search for help may take you back to your oil analysis report. Do you get a human voice to talk to when you call? Is there any on line communication available? How quick does someone get back to you? What sort of expertise do the lab personnel maintain? These questions are best asked directly.

    3. Are Web-based management reporting tools available?
    Web-based management tools make managing and administering your oil analysis program much easier. With web based tools you can view reports, order supplies, print labels, monitor your sampling activity, import data, and many other functions. The time you’ll save and aggravation you will avoid using a web-based interface makes the answer to this question critical in your decision-making process.

    4. Does the lab automatically include analytical ferrography?
    Ferrography is a technique for analyzing the wear particles present in fluids that indicate mechanical wear. Performing ferrography enables the analyst to see the whole picture. It is important that your lab takes testing to the next step by performing analytical ferrography on abnormal samples. Ask the lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits

    A Cleaner Way To Make Money
    Are you looking to supplement your income? Looking for a new way to make money? Want to start your own business? You can start earning money almost straight away with a cleaning job and gradually build your business until you have a team of contractors working for you pulling in profits.Cleaning houses is becoming a very lucrative occupation with very little cash outlay and is a great way to earn the extra cash you need whilst building your own business. More and more women are going back into the work force creating the need for cleaners to help them maintai
    right company? Here are five critical questions to ask when evaluating an oil analysis laboratory to ensure a successful long term oil analysis program.

    1. What is your normal turnaround?
    Contrary to popular belief, there are oil analysis laboratories out there that have the capability to provide high quality results and reporting in 24 hours. If the lab you’re working with doesn’t provide this, at least make sure expectations are defined up front. Know exactly what you’ll be receiving, and when. Do “days” include weekends? What about business hours?

    While sample turnaround varies, just asking this question up front can give you a good idea of the overall process efficiency. No matter what the turnaround time, there should always be notification systems in place so that you know when your samples have been received and when your samples are finished. The samples you pull contain time sensitive information which should be conveyed to you in a prompt fashion. The sooner you get your results the better your program runs.

    2. Is there an open line of communication?
    It’s important to know you won’t be left high and dry in the event you need answers or support immediately. Often times pressing machine problems arise unexpectedly and your search for help may take you back to your oil analysis report. Do you get a human voice to talk to when you call? Is there any on line communication available? How quick does someone get back to you? What sort of expertise do the lab personnel maintain? These questions are best asked directly.

    3. Are Web-based management reporting tools available?
    Web-based management tools make managing and administering your oil analysis program much easier. With web based tools you can view reports, order supplies, print labels, monitor your sampling activity, import data, and many other functions. The time you’ll save and aggravation you will avoid using a web-based interface makes the answer to this question critical in your decision-making process.

    4. Does the lab automatically include analytical ferrography?
    Ferrography is a technique for analyzing the wear particles present in fluids that indicate mechanical wear. Performing ferrography enables the analyst to see the whole picture. It is important that your lab takes testing to the next step by performing analytical ferrography on abnormal samples. Ask the lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits

    Cartesis Business Performance Management Solutions
    Most financial executives use some form of rolling forecast to guide their financial planning and budgeting efforts, but do so in rudimentary fashion, employing mostly manual business performance management processes and spreadsheets that inevitably fail to deliver the accuracy and manageability they are seeking. A recent survey of more than 320 senior finance executives in North America and Europe showed that over 68% of companies have developed and deployed rolling forecasts. However, most of these executives still feel they need to improve the acc
    when your samples have been received and when your samples are finished. The samples you pull contain time sensitive information which should be conveyed to you in a prompt fashion. The sooner you get your results the better your program runs.

    2. Is there an open line of communication?
    It’s important to know you won’t be left high and dry in the event you need answers or support immediately. Often times pressing machine problems arise unexpectedly and your search for help may take you back to your oil analysis report. Do you get a human voice to talk to when you call? Is there any on line communication available? How quick does someone get back to you? What sort of expertise do the lab personnel maintain? These questions are best asked directly.

    3. Are Web-based management reporting tools available?
    Web-based management tools make managing and administering your oil analysis program much easier. With web based tools you can view reports, order supplies, print labels, monitor your sampling activity, import data, and many other functions. The time you’ll save and aggravation you will avoid using a web-based interface makes the answer to this question critical in your decision-making process.

    4. Does the lab automatically include analytical ferrography?
    Ferrography is a technique for analyzing the wear particles present in fluids that indicate mechanical wear. Performing ferrography enables the analyst to see the whole picture. It is important that your lab takes testing to the next step by performing analytical ferrography on abnormal samples. Ask the lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits

    The Core Principles of Budget Planning
    When it comes to budget planning you need a solid plan that will map out what it is you need to be doing with your money. If you don’t have a budget then you are out spending money and really aren’t making sure you have enough to pay your bills or even that you have enough set aside for emergencies or retirement. So, it is important to have budget planning software that will help you create your budget and follow it each month. That way you will spend only what needs to be spent and save whatever amount it is you want to save. Budgeting software is excellent because
    rting tools available?
    Web-based management tools make managing and administering your oil analysis program much easier. With web based tools you can view reports, order supplies, print labels, monitor your sampling activity, import data, and many other functions. The time you’ll save and aggravation you will avoid using a web-based interface makes the answer to this question critical in your decision-making process.

    4. Does the lab automatically include analytical ferrography?
    Ferrography is a technique for analyzing the wear particles present in fluids that indicate mechanical wear. Performing ferrography enables the analyst to see the whole picture. It is important that your lab takes testing to the next step by performing analytical ferrography on abnormal samples. Ask the lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits

    How To Get Sales Leads At Trade Shows
    Getting sales leads is vital to every business. Every business has to have customers; and prospective clients are what they identify as sales leads. Even the teenage girl who is eyeing some fashionable clothes in a magazine can be considered a sales lead. The typical sales leads, however, are those that have the potential to be customers whom sales people get in touch with in many ways, several times before they jump into conclusions in buying and procuring the company’s product or service. For many years now, sales people have had a hard time generating sales leads
    lab if and when they perform ferrography and what they charge for the test. It’s important to determine whether a lab offers ferrography because there are some instances where the standard tests uncover problems but may not be able to quantify the extent of the abnormality.

    5. How are alarm levels compared?
    In assessing machine condition, it is essential not only to look at the machine’s current and past data, but also compare that particular machine with the “family” that the machine is a member. Families can be made up of machine types, manufacturers, models, and sump capacities depending on the level of information provided by the user. Statistics are calculated by looking into the database and extracting previous test results of “family” data. Family alarming produces tight limits which provide great value to the oil analysis user.

    Another alarming method is to use customer specific limits. When a customer has previous knowledge of machine fault levels, it is beneficial to provide these hard limits to the lab. They can be utilized at either the machine or customer level to trigger appropriate alarms. If there is not enough information identifying a machine but there is historical information for the specific sampling point, alarms can be set by using linear regression.

    HTTP = HTML link (for blogs, profiles,phorums):
    <a href="http://www.articledump.net/article/676/articledump-What-to-Look-For-in-an-Oil-Analysis-Lab.html">What to Look For in an Oil Analysis Lab</a>

    BB link (for phorums):
    [url=http://www.articledump.net/article/676/articledump-What-to-Look-For-in-an-Oil-Analysis-Lab.html]What to Look For in an Oil Analysis Lab[/url]

    Related Articles:

    Why In The World Would You Hire A Freelance Writer?

    Got A Business Idea But No Money? Here Are 5 Tips On Funding A Women Owned Business

    Textile Crafts of Gujarat - A Rich Cultural Heritage

    Bookmark it: del.icio.us digg.com reddit.com netvouz.com google.com yahoo.com technorati.com furl.net bloglines.com socialdust.com ma.gnolia.com newsvine.com slashdot.org simpy.com shadows.com blinklist.com