Tags |
|
|
Links |
|
|
Atricle Dump - Create Your Own Business Cards, Part 1
What I’m about to reveal to you is “classified” information. Top secret stuff.Okay… maybe not top secret… but you should know some entrepreneurs pay big bucks for the information I’m about to reveal to you. And that’s no fib either.If your business is listed in the yellow pages this strategy will send lots of customers your way… resulting in more
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and
You have made the decision to sell your healthcare information technology company. Maybe it was because your prospects are selecting the inferior product but superior safety of your brand name competitor. It could be that one of the industry giants recently acquired one of your small but worthy competitors and has removed the risk component of a buyer's decision.
Choose the information you want to place on your card before beginning.
Here's how I did it:
Go to 'start' --'Microsoft Word' -- 'file menu' -- 'page setup'. Choose the 'Margins Tab'. Type in 1.25 for the Left and Right margins. That way, two cards will fit on a 8 1/2 x 11in. sheet, side by side. Click 'ok'.
In the 'Format Menu' choose 'Columns'. Where it asks for the number of columns, use the arrows to go down until the number 'two' is in the box. Go down to 'Width' and type in 2.75in. The 'Spacing' will adjust automatically. Be sure the 'Equal Column Width' and the 'Line Between' boxes are checked. Click 'ok'.
Let's save it, at this point. Go to the 'File Menu' and choose 'Save As'. You can save it in the same folder we saved the Letterhead, if you choose. I saved mine with my letterhead in 'Business Stationery'. Give the file a name. I named mine -- 'My Business Card'. Click 'Save'.
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and
Do you remember your first day as a business owner? You were probably just like the rest of us... pretty darned happy and bit on the proud side. Yeah, back then we thought we could conquer the world. Now we're too busy conquering our own little corner of the world to pay a lot of attention to the rest of the world... unless it's to learn a few tips from successfu
Here's how I did it:
Go to 'start' --'Microsoft Word' -- 'file menu' -- 'page setup'. Choose the 'Margins Tab'. Type in 1.25 for the Left and Right margins. That way, two cards will fit on a 8 1/2 x 11in. sheet, side by side. Click 'ok'.
In the 'Format Menu' choose 'Columns'. Where it asks for the number of columns, use the arrows to go down until the number 'two' is in the box. Go down to 'Width' and type in 2.75in. The 'Spacing' will adjust automatically. Be sure the 'Equal Column Width' and the 'Line Between' boxes are checked. Click 'ok'.
Let's save it, at this point. Go to the 'File Menu' and choose 'Save As'. You can save it in the same folder we saved the Letterhead, if you choose. I saved mine with my letterhead in 'Business Stationery'. Give the file a name. I named mine -- 'My Business Card'. Click 'Save'.
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and
The impact of injection molding on the economy is bigger than you think. Since its invention in 1872, the injection molding process (along with the plastics industry) has turned into a multi billion dollar industry. Injection molding manufactures around 32% of plastics by weight. Because of this process, the construction of a lot of durable consumer and industria
Let's save it, at this point. Go to the 'File Menu' and choose 'Save As'. You can save it in the same folder we saved the Letterhead, if you choose. I saved mine with my letterhead in 'Business Stationery'. Give the file a name. I named mine -- 'My Business Card'. Click 'Save'.
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and
May I lick the contract?The Chemical Signature is a simple concept: make your ink unique by mixing a new color and adding secret components. Even salt and sugar will do it. Now, the custom ink could have been invented by Da Vinci, but without Internet it would have been very hard to associate a person with its Own Ink. It is possible now for everyone to
Let's save it, at this point. Go to the 'File Menu' and choose 'Save As'. You can save it in the same folder we saved the Letterhead, if you choose. I saved mine with my letterhead in 'Business Stationery'. Give the file a name. I named mine -- 'My Business Card'. Click 'Save'.
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and
The reason for any professional or trade association to exist is for the purpose of synergistic and mutual improvement of the persons and organizations involved is a particular industry or profession. I believe an association to be a gathering of people with similar interests and goals. This gathering must be a multi-faceted partnering alliance between members (i
Go to the 'Table Menu' and choose 'Insert Table'. Set the number of 'Columns' and 'Rows' to 'one'. Click 'ok'.
A long, thin box will appear. Move your mouse cursor to the bottom line, until it turns into a double-headed arrow. Click on the double-headed arrow and drag it down to the 2in. mark on the left hand side ruler. If the ruler isn't visible in your document, go to the 'View Menu' and click on 'ruler'.
Click inside the box and add your picture. You have two options here:
1) You can use 'ClipArt', by going to the 'Insert menu' -- 'Picture' -- 'ClipArt. Choose your category and find the graphic suitable for your business, click 'ok'. The image will appear in your document.
2) You can use your company logo, if you have one, or another picture on your hard drive, by going to the 'Insert Menu' -- 'Picture' -- 'From File'. The pictures on your hard drive (saved in 'My Documents' -- 'My Pictures' will appear). Scroll down the list until you find the one you want to insert. Click on the picture you have chosen, to highlight it. Then click on the 'Insert' button. The picture will appear in your document.
To move the picture around inside your table, click on the picture. You will see a four arrow symbol. This allows you to move the picture up, down, right or left, by dragging it to the position you want. I wanted my picture to appear in the left, top position, so I moved i
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.articledump.net/article/7338/articledump-Create-Your-Own-Business-Cards-Part-1.html">Create Your Own Business Cards, Part 1</a>
BB link (for phorums):
[url=http://www.articledump.net/article/7338/articledump-Create-Your-Own-Business-Cards-Part-1.html]Create Your Own Business Cards, Part 1[/url]
Related Articles:
Profit Potential of the Product Life Cycle
Corporate Buyouts of Mines Play Part in Safety Issues
Bookmark it:
|